Function Introduction

The PlugOS device needs to be authenticated and bound to the host (i.e., your phone or tablet). You will need to enter the device recovery key to complete the authentication and binding process.

Operation Steps

1. Connect the PlugOS device to the host (make sure the OTG function on your phone is enabled), and wait for the device indicator light to turn on.

2. Tap the PlugOS icon, as shown in the image below:

1. After opening the app, an alert will pop up on Android. Check the option “Use by default for this USB device” and click “OK”. The app will automatically show a popup saying “New device detected”, tap “Add now” to start the binding process. Alternatively, you can also select “Add new device” to proceed.

1. Manually enter the product key, or tap the “Camera” icon to scan the product key QR code. After completion, click “Confirm” to proceed to the next step, as shown below:

1. After the product key is successfully verified, enter the desired product name and click “OK” to complete the addition process. See the images below: