PlugOS provides 2 GPS positioning methods:

1. Use the host device’s location;
2. User customizes the current location by entering latitude/longitude or selecting a point on the map.

How to use:

1. Go to “PlugOS Settings” → “Virtual Peripherals” → “GPS Location”
2. Use the host device’s location information: Click “Host GPS Mode” → “Apply”
3. Use user-defined location information:
   • Enter latitude and longitude to customize the current location: Click “User-defined Location Mode” → Enter Latitude and Longitude (note: must enter WGS84 coordinate system coordinates) → Click “Apply”
   • Select from map to customize the current location: Click “User-defined Location Mode” → Click “Map selection” → The map opens, select and click the position you want to set, click “Confirm selection” → Click “Apply”
4. The user can open a third-party map APP, click “My Location”, and the corresponding location will be displayed